Side Engine Mount Removal/Installation

Side Engine Mount Removal and Installation

Removal

1. Remove the auxiliary under-hood fuse/relay box (A) from the mounting bracket (B), then remove the bolt (C).






2. Remove the bracket (A), free the A/C discharge line (B) from the clip (C) and remove the A/C suction line mounting bracket bolt (D).






3. Remove the PCM cover (E), then disconnect the PCM connectors (F).

4. Remove the engine wire harness connector (A) and the harness clamp (B) from the PCM bracket (C).






5. Remove the PCM with the bracket, then remove the harness bracket (D).

6. Remove the coolant reservoir from the bracket.

7. Lift and support the engine with a jack and a wood block under the oil pan.

8. Remove the ground cable bracket (A), then remove the upper half of the side engine mount bracket (B).






9. Remove the side engine mount (A).






Installation

1. Install the side engine mount (A).






2. Loosely install the upper half of the side engine mount bracket (A).






3. Install the ground cable bracket (B).

4. Remove the jack and the wood block.

5. Tighten the mounting bolts in the numbered sequence shown.

6. Install the coolant reservoir to the bracket.

7. Install the harness bracket (A), then install the PCM with the bracket (B).






8. Install the engine wire harness connector (C) and the harness clamp (D) to the PCM bracket.

9. Connect the PCM connectors (A), then install the PCM cover (B).






10. Install the A/C suction line mounting bracket bolt (C), A/C discharge line (D) to the clip (E), and install the bracket (F).

11. Install the bolt (A), then install the auxiliary under-hood fuse/relay box (B) to the mounting bracket (C).