2A97

2A97 - P0370

Information saved in
DME

Fault code
2A97 - P0370

Fault text
Crankshaft sensor, gap fault

Fault description
Timing Reference High Resolution Signal 'A'

Condition for fault identification
Test condition:
Crankshaft signal monitor
recognized
Terminal condition: Terminal 15, engine on

Condition for fault memory entry
At each synchronization gap when a tooth time was out of
tolerance on the last rotation.

Action in service
1. Check signal wire for short to positive, ground, opens and
interference signals
2. Replace crankshaft sensor

Fault effect and breakdown warning


Driver information
none

Service instruction
none