P0113

2F08 - P0113

Information saved in
DME

Fault code
2F08 - P0113

Fault text
Intake-air temperature sensor, signal

Fault description
Intake Air Temperature Sensor 1 Circuit High (Bank 1)

Condition for fault identification
Test condition:
Time after end of start phase > 120 sec.
Terminal condition: Terminal 15 ON
Voltage condition:
Voltage in onboard electrical system > 10 V

Condition for fault memory entry
0.2 sec.

Action in service
1) Perform electrical check on sensor wire and power-supply
wires
2) Visual inspection of plug-in contacts (on component and
DME ends) 3) Replace sensor

Fault effect and breakdown warning


Driver information
Warning light:
MIL ON in US versions only

Service instruction
none