4T65-E Automatic Transaxle

Removal Procedure
1. Remove the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement in Powertrain Management.





2. Remove the automatic transaxle range selector cable from the automatic transaxle range selector lever.





3. Remove the automatic transaxle range selector lever nut.
4. Remove the automatic transaxle range selector lever.

Installation Procedure





1. Install the automatic transaxle range selector lever.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the automatic transaxle range selector lever nut.
^ Tighten the automatic transaxle range selector lever nut to 20 Nm (15 ft. lbs.).





3. Install the automatic transaxle range selector cable to the automatic transaxle range selector lever.
4. Adjust the automatic transaxle range selector cable if necessary. Refer to AT Range Selector Cable Adjustment.
5. Install the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement in Powertrain Management.