Accident With Frontal Air Bag Deployment

After a collision involving air bag deployment, replace the following components. If you detect any damage to the mounting points or mounting hardware, repair or replace the mounting points and mounting hardware as needed.
^ The inflatable restraint IP (inflator) module
^ The inflatable restraint steering wheel (inflator) module
^ The inflatable restraint steering wheel module coil
^ The inflatable restraint sensing and diagnostic module (SDM)
^ The inflatable restraint electronic frontal sensor (EFS)
^ The inflatable restraint side impact inflator module (seat air bag) if deployed

After a collision involving an inflator module deployment, inspect the Inflatable restraint steering wheel module coil and the coil wiring pigtail for melting, scorching, or other damage due to excessive heat. Perform this component inspection in addition to the inspections indicated above in Accident With or Without Inflator Module Deployment. If you detect any damage, replace the component. If you detect any damage to the mounting points or mounting hardware, repair the component or replace the hardware as needed.