Park, Tail and Marker Lamps

The park, tail and marker lamps, including the license lamps, are turned on when the headlamp switch is placed in either the PARK or HEADLAMP position, or anytime the headlights are requested. The PARK LPS fuse in the underhood fuse block, supplies battery positive voltage to both the park lamp relay switch contacts and park lamp relay coil circuit. The park lamp relay coil is controlled by the Body Control Module (BCM). When the headlamp switch is placed in the PARK position, the BCM will then energize the park lamp relay coil control circuit. Current flow is now from the park lamp relay to the park/tail lamps. The front park lamps are grounded at G100 and G101. The rear park lamps are grounded at G401 and G402. The license plate lamps are a part of the rear park lamp circuit and are grounded at G401. The inadvertent power control feature prevents the park lights from remaining on more than 10 minutes if left on. If the park lights are turned on after the ignition switch has been turned OFF, or is in the ACCY position, they will remain on until turned off or the battery runs dead.