Console Replacement - Front Floor

CONSOLE REPLACEMENT - FRONT FLOOR

REMOVAL PROCEDURE
1. Remove the front floor console trim plate.
2. Disconnect the electrical connectors.




3. Remove the nuts from the side of the front floor console.
4. Remove the nuts from the rear of the front floor console.




5. Lift straight up on the front floor console and pull back in order to remove the console from the vehicle.

INSTALLATION PROCEDURE




1. Align the front floor console to the floor.
2. Connect the required electrical connectors.




3. Install the nuts to the side of the front floor console.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the nuts to 6 N.m (53 lb in).

4. Install the nuts to the rear of the front floor console.

Tighten the nuts to 6 N.m (53 lb in).

5. Install the front floor console trim plate.