Rear Crankshaft Main Bearing Seal: Service and Repair

Crankshaft Rear Oil Seal Replacement

Special Tools

EN-42067 - Rear Main Seal Installer.

For equivalent regional tools, refer to Special Tools Tools and Equipment.

Removal Procedure

1. Remove the automatic transmission flex plate. Refer to Automatic Transmission Flex Plate Replacement Service and Repair.





2. Remove the crankshaft rear oil seat (1) with a suitable tool.

Installation Procedure





1. Install the crankshaft rear oil seat (1) with the EN-42067 - installer.

2. Install the automatic transmission flex plate. Refer to Automatic Transmission Flex Plate Replacement Service and Repair.