Exhaust Manifold Heat Shield Replacement - Right

Exhaust Manifold Heat Shield Replacement - Right Side (LP1, LY7)
Removal Procedure

Caution: Refer to Exhaust Service Caution in Service Precautions.

Caution: Refer to Protective Goggles and Glove Caution in Service Precautions.





1. Remove the upper exhaust manifold heat shield bolts.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the exhaust manifold heat shield lower bolt.
4. Remove the exhaust manifold heat shield.





5. Remove the lower exhaust manifold heat shield retainers (1), if necessary.
6. Remove the lower exhaust manifold heat shield (2), if necessary.

Installation Procedure





1. Install the lower exhaust manifold heat shield (2), if necessary.
2. Install the lower exhaust manifold heat shield retainers (1), if necessary.





3. Install the exhaust manifold heat shield.
4. Install but do not tighten the exhaust manifold heat shield lower bolt.
5. Lower the vehicle.

6. Install the exhaust manifold heat shield upper bolts.
Tighten the bolts to 10 Nm (89 inch lbs.).

Notice: Refer to Fastener Notice in Service Precautions.

7. Raise and support the vehicle. Refer to Vehicle Lifting.
8. Tighten the exhaust manifold heat shield lower bolt.
Tighten the bolt to 10 Nm (89 inch lbs.).
9. Lower the vehicle.