Rear

SEAT BELT RETRACTOR REPLACEMENT - REAR

REMOVAL PROCEDURE
1. Remove the rear seat cushion.

CAUTION: Refer to SIR Caution in Service Precautions.

2. Remove the rear seat back.




3. Remove the rear seat shoulder belt to the floor pan fastener.
4. Remove the rear trim shelf panel.
5. Remove the sail panel.




6. Remove the seat belt retractor fastener (2).
7. Remove the seat belt retractor (1).

INSTALLATION PROCEDURE




1. Install the rear shoulder belt retractor (1). Engage the tab on the retractor (1).
2. Install the seat belt retractor fastener (2).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the rear seat retractor fastener to 30 N.m (22 lb ft).




3. Route the shoulder belt through the sail panel and verify that it is not twisted.
4. Install the shoulder belt fastener.

Tighten the shoulder bolt fastener to 30 N.m (22 lb ft).

5. Install the sail panel.
6. Install the rear trim shelf panel.
7. Install the rear seat back.
8. Install the rear seat cushion.