Power Door Lock Switches

The power door lock switches are used to either arm or disarm the CTD system. Pressing the lock position will cause the CTD to arm after all doors are closed and the 30 second delay period has elapsed. Pressing the unlock position with the CTD system in any mode except ARMED will cause the CTD system to enter the disarm mode.

IMPORTANT
The CTD system can be armed with the windows or sunroof open.

Inputs
The BCM monitors the following inputs:
^ Driver and passenger door ajar switches (including hatch ajar switch)
^ Driver and passenger power door lock/unlock switches
^ Ignition lock cylinder input
^ Drivers door key switch (W/O VE1)
^ Front door key switches (W/VE1)
^ Transmitter LOCK/UNLOCK buttons, class 2 message from the Remote Control Door Lock Receiver (RCDLR), if equipped

Outputs
The BCM controls the following:
^ Theft deterrent relay
^ The horn relay
^ The exterior lights

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes