Folding Top Glare Cover Replacement

Folding Top Glare Cover Replacement

Removal Procedure




1. Position the folding top with the #1 bow and the #5 bow up, and open the stowage compartment.




2. Remove the glare cover screws at each end of the #5 bow (5).
3. Remove the elastic strap screws from the #5 bow.




4. Drill out the glare cover rivets from the #5 bow.

Installation Procedure




1. Rivet the glare cover to the #5 bow.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the glare cover screws to the #5 bow.

Tighten the screws to 2 N.m (18 lb in).

3. Install the screws attaching the elastic straps to the #5 bow.

Tighten the screws to 2 N.m (18 lb in).

4. Close the stowage lid and latch the top.