Folding Top Seal Compression Panel Replacement

Folding Top Seal Compression Panel Replacement

Removal Procedure




1. Remove the screws from the front side rail seal on the #1 bow.




2. Remove the screws from the seal compression panel on the #1 bow.




3. Remove the panel.

Installation Procedure




1. Position the seal compression panel to the #1 bow.






Notice: Refer to Fastener Notice in Service Precautions.

2. Install the screws to the seal compression panel on the #1 bow.

Tighten the screws to 3 N.m (26 lb in).




3. Install the screw to the front side rail seal on the #1 bow.

Tighten the screw to 2 N.m(18 lb in).