14. Extension Housing Disassemble

^ Tools Required
^ J 26941 Bearing Race Remover
^ J 23907 Slide Hammer





1. Remove the reverse idler shaft bracket bolts.
2. Remove the bracket.





3. Remove the following parts in order:
3.1. The reverse idler gear
3.2. The roller bearing
3.3. The reverse idler shaft





4. Remove the following parts in order:
4.1. The countershaft extension bearing race
4.2. The shim
4.3. The funnel
4.4. Remove the outer and inner output shaft seals (pry out the seals with a suitable tool).





5. Remove the mainshaft bearing race retainer ring.

Important: Do not replace the bearing race unless inspection shows bearing race damage.

6. Remove the mainshaft bearing race using the J 26941 and the J 23907.