Console Replacement - Front Floor

Console Replacement - Front Floor (Monte Carlo)

Removal Procedure




1. Remove the trim plate from the front floor console.
2. Disconnect the wiring harness connector and retainer.
3. Open the console storage compartment.
4. Remove the storage compartment mat.
5. Remove the bolts from the bottom of the storage compartment.
6. Remove the console bolts forward of the shift control lever.
7. Remove the front floor console.

Installation Procedure




1. Install the front floor console.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the console bolts forward of the shift control lever and at the bottom of the storage bin.

Tighten the console bolts to 12 N.m (106 lb in).

3. Install the storage compartment mat.
4. Close the console storage compartment.
5. Connect the wiring harness connector and retainer.
6. Install the front floor console trim plate.