Air Inlet Valve and Inside Air Valve Control Cam Replacement (Left Hand Drive)

Air Inlet Valve and Inside Air Valve Control Cam Replacement (Left Hand Drive)

Removal Procedure

1. Remove instrument panel compartment assembly. Refer to Instrument Panel Compartment Replacement (Instrument Panel Compartment Replacement).




2. Disconnect electrical connector and remove 3 mode control cam actuator screws (2) and remove mode control cam actuator (1).





Note: The graphic shows Air Inlet Housing without attaching parts for better clarity.

3. Remove air inlet valve and inside air valve control cam (1).

Installation Procedure





Note: The air inlet valve and inside air valve control cam can only be fitted in one position.

1. Install air inlet valve and inside air valve control cam (1).





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install mode control cam actuator (1) and install 3 mode control cam actuator screws (2) and connect electrical connector. Tighten to 2.5 Nm (23 lb in).
3. Install instrument panel compartment assembly. Refer to Instrument Panel Compartment Replacement (Instrument Panel Compartment Replacement).