C0565
DTC C0565
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle Diagnostic System Check - Vehicle prior to using this diagnostic procedure.
* Review Strategy Based Diagnosis Strategy Based Diagnosis for an overview of the diagnostic approach.
* Diagnostic Procedure Instructions Diagnostic Procedure Instructions provides an overview of each diagnostic category.
DTC Descriptor
DTC C0565 5A
- Vehicle Identification Number Not Plausible
Circuit/System Description
The vehicle identification number (VIN) is programmed into the power steering control module during initial programming of the module.
Conditions for Running the DTC
Ignition ON.
Conditions for Setting the DTC
The power steering control module is properly not programmed.
Action Taken When the DTC Sets
* DTC C0565 is stored in memory.
* No steering assist.
Conditions for Clearing the DTC
A history DTC will clear after 40 consecutive malfunction free ignition cycles.
Reference Information
Schematic Reference
Power Steering Schematics Electrical Diagrams
Connector End View Reference
Component Connector End Views Sunshade - Left
Description and Operation
Power Steering System Description and Operation (Electronic Power Steering) Description and Operation
Electrical Information Reference
* Circuit Testing Circuit Testing
* Connector Repairs Connector Repairs
* Testing for Intermittent Conditions and Poor Connections Testing for Intermittent Conditions and Poor Connections
* Wiring Repairs Wiring Repairs
Scan Tool Reference
Control Module References Control Module References for scan tool information.
Circuit/System Verification
1. Ignition ON.
2. Verify that DTC C0565 is not set.
• If the DTC C0565 is set
1. Program the K43 Power Steering Control Module.
2. Verify the DTC does not set.
• If the DTC sets,
replace the K43 Power Steering Control Module.
• If the DTC does not set
3. All OK.
• If the DTC C0565 is not set
3. All OK.
Repair Instructions
Perform the Diagnostic Repair Verification Verification Tests after completing the repair.
* Power Steering Assist Motor Replacement Service and Repair
* Control Module References Control Module References for Power Steering Control Module replacement, programming and setup.