Front Axle Vent Hose Replacement

Remove or Disconnect

1. Skid plate (if equipped).
2. Clamp (52).
3. Vent hose (53) from the axle.
^ Note routing to aid in reassembly.
4. Bolt (50).
5. Clip (54)
6. Vent hose (53).

Install or Connect

1. Hose (53) to the vehicle.
^ Route the same way as when removed.
^ Make sure it is free of kinks and is routed clear of sharp components.
^ Make sure the vent is not plugged.
2. Clip (54).
3. Bolt (50) and clamp (51).
4. Vent hose to the axle fitting.
5. Clamp (52).
6. Skid plate (if equipped).