Transmission Heat Shield Replacement

Transmission Heat Shield Replacement

Removal Procedure




1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the front heat shield bolts (2).
3. Remove the front heat shield (1).
4. Remove the side heat shield bolt (4) and nut (5).
5. Remove the side heat shield (3).

Installation Procedure




1. Install the side heat shield (3).
Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the side heat shield bolt (4) and nut (5).

* Tighten the bolt (4) to 17 Nm (13 lb ft).
* Tighten the nut (5) to 25 Nm (18 lb ft).

3. Install the front heat shield (1).
4. Install the front heat shield bolts (2).

Tighten the bolts (2) to 17 Nm (13 lb ft).

5. Lower the vehicle.