A/C Belt
REMOVAL1. Remove generator/power steering drive belt to gain access to the air conditioning drive belt.
Fig. 36
2. To remove air conditioning drive belt, first loosen the tensioner pulley lock nut, then loosen the adjusting screw to the tensioner pulley assembly until the belt can be removed (Fig. 36).
INSTALLATION
Belt Tension Chart
1. Install air conditioning belt over drive pulleys. Tighten the tensioner adjusting bolt until the belt is at specified tension using a Belt Tension Gauge. Refer to Belt Tension Chart. Tighten tensioner pulley locking nut to 54 Nm (40 ft. lbs.).
2. Install generator/power steering drive belt and adjust to specified tension.
Air Conditioning Belt Tension Adjustment
Loosen the tensioner pulley locking nut and adjust belt tension by tightening adjusting bolt. Use Belt Tension Gauge and refer to Belt Tension Chart for specifications. Torque pulley nut to 54 Nm (40 ft. lbs.) after adjustment.