Windshield Washer Reservoir: Service and Repair

REMOVAL

Negative Battery Cable:

1. Disconnect and isolate the negative battery cable.
2. Hoist and support vehicle on safety stands.
3. Remove right front wheel.
4. Remove front wheelhouse splash shield.

Windshield Washer Bolts:

5. Disconnect connectors from the front windshield and rear window washer pumps, the fluid level sensor, and the rear washer hose.
6. If washer bottle has fluid in it place a suitable drain pan under the hose connections.

Front Washer Hose:

7. Disconnect front washer hose at front wiper unit in the engine compartment. The front hose will be removed with the bottle.
8. Allow washer bottle to drain.
9. Remove screws holding washer bottle to front fender support and remove bottle.

INSTALLATION
For installation, reverse the above procedure.