Instrument Cluster Cover - RHD

REMOVAL




1. Disconnect the negative battery cable.
2. Remove the right side lower instrument panel.
3. Remove the SKREEM antenna ring from the key cylinder.
4. Remove the screws attaching the instrument cluster cover to the I/P.
5. Disconnect the instrument cluster cover from the I/P top with a plastic wedge.
6. Tip the instrument cluster cover toward the rear at the bottom. Lift the instrument cluster cover over the steering column and simultaneously pull down releasing the cover from the I/P.

INSTALLATION




1. Tip the instrument cluster cover toward the front at the top, then lift it over the column and install the cover firmly into the I/P.
2. Install the screws attaching the instrument cluster cover to the lower instrument panel.
3. Install the SKREEM antenna ring to the key cylinder.
4. Install the right side lower instrument panel.
5. Connect the negative battery cable.