Removal and Replacement

FRONT DOOR LOCK CYLINDER

REMOVAL

COUPE
1. Remove door trim panel and water dam.
2. Raise door glass.
3. Disconnect door lock rod from latch.
4. Disengage wiring from lock cylinder if so equipped.
5. Remove fasteners attaching lock cylinder retainer to door.
6. Remove lock cylinder retainer.
7. Pull lock cylinder from door handle.

CONVERTIBLE




1. Remove door trim panel and water dam.
2. Raise door glass.
3. Disconnect door lock rod from latch.
4. Disengage wiring from lock cylinder if so equipped.
5. Remove fasteners attaching lock cylinder (5) retainer to door.
6. Remove lock cylinder retainer.
7. Pull lock cylinder from door handle.

INSTALLATION

COUPE
1. Place lock cylinder and gasket into door outer panel.
2. Install cylinder retainer to door.
3. Connect door lock rod from latch.
4. Engage wiring connectors, if equipped.
5. Install door trim panel and water dam.

CONVERTIBLE




1. Place lock cylinder (5) and gasket into door outer panel.
2. Install cylinder retainer to door.
3. Connect door lock rod from latch.
4. Engage wiring connectors, if equipped.
5. Install door trim panel and water dam.