Front Wiper Blade Replacement

REMOVAL
1. Lift wiper arm to raise blade off glass.

Remove Blade From Arm:

2. Remove blade assembly from arm by pushing release tab under arm tip and slide blade away from arm tip.
3. Let wiper arm rest on front windshield.

Windshield Wiper Blade Element:

4. Remove wiping element from blade assembly Pull stopper of the rubber element out of the end of the claw together with vertebra (metal rails).

INSTALLATION
After Installation, check that the element and vertebra are through all claws and the final claw is locked in the stopper.

1. Install wiping element into blade assembly. Push stopper of the rubber element in the end claw together with vertebra (metal rails)
2. Install blade assembly on arm by pushing tab under the hook on the arm tip and slide blade into arm tip.
3. Let wiper arm/blade rest on front windshield.
4. Verify system operation.