Radio, Stereo, and Compact Disc: Service and Repair

SATELLITE RECEIVER MODULE

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the left rear quarter trim panel.

Fig. 16 Satellite Receiver Module:

3. Remove the mounting bracket fasteners.
4. Disconnect the wire harness connectors.
5. Remove the module from the mounting bracket.

INSTALLATION
1. Position the module to the mounting bracket. Tighten mounting fasteners to 6 Nm (53 in. lbs.).
2. Connect wire harness connectors.
3. Install mounting bracket and fasteners. Tighten to 5 Nm (45 in. lbs.).
4. Install the left rear quarter trim panel.
5. Connect the battery negative cable.