Hose - Turbocharger to Charge Air Cooler

HOSE - TURBOCHARGER TO CHARGE AIR COOLER

REMOVAL





1. Raise vehicle on hoist.
2. Loosen hose clamp at charge air cooler (1).
3. Dislodge hose from charge air cooler.
4. Loosen hose clamp at turbocharger.
5. Dislodge hose from turbocharger.
6. Remove nuts (3) securing charge air cooler hose to structural collar. Engine Mount
7. Remove charge air cooler hose.

INSTALLATION

1. Position hose to mounting location.
2. Temporarily install nuts securing charge air cooler hose to structural collar.
3. Connect hose to turbocharger.
4. Connect hose to charge air cooler.
5. Tighten hose clamps to 1.7 Nm (15 inch lbs.).
6. Tighten nuts securing charge air cooler hose to structural collar.
7. Lower vehicle.