Installation

INSTALLATION




1. If removed, install the intake air temperature (IAT) sensor.
2. Position the resonator (1) to the top of the engine and connect it the throttle body (2). Make sure the resonator is properly installed over the throttle body inlet.
3. Install the two bolts (3) that secure the resonator to the top of the engine. Tighten the bolts securely.
4. Connect the engine wire harness connector (5) to the IAT sensor.
5. Connect the PCV fresh air hose (4) to the front of the resonator.
6. Install the air intake hose.
7. Reconnect the negative battery cable.