Step 31 - 40

DISASSEMBLY

NOTE: If transaxle is being overhauled (clutch and/or seal replacement) or replaced, it is necessary to perform the PCM/TCM Quick Learn Procedure Testing and Inspection.

NOTE: This procedure does not include final drive (differential) disassembly.





31. Remove 2/4 clutch return spring (1).




32. Remove 2/4 clutch pack (1,2). Tag 2/4 clutch pack for reassembly identification.




33. Remove tapered snap ring (3).




34. Remove low/reverse reaction plate (1).




35. Remove one low/reverse clutch disc (1).




36. Remove low/reverse reaction plate snap ring (2).




37. Remove low/reverse clutch pack (1,2).




38. Remove transfer gear cover-to-case bolts (1).




39. Remove transfer gear cover (1).




40. Install holder 6259 (3).