Park/Turn Signal Bulb - Installation

INSTALLATION

CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the lamp, the socket or the lamp wiring.





1. Align the base of the bulb (2) with the park/turn signal bulb socket (1).
2. Push the bulb straight into the socket until the base is firmly seated.





3. Align the socket and bulb (2) with the keyed opening on the back of the front lamp unit housing.
4. Insert the socket and bulb into the housing until the socket is firmly seated.
5. Rotate the socket clockwise about 30 degrees to lock it into place.
6. If equipped, reinstall the rubber boot cover onto the back of the front lamp unit housing.
7. Reinstall the front lamp unit onto the vehicle. Front Lamp Unit - Installation.
8. Reconnect the battery negative cable.