Installation

NOTE: Always install a new seal.


1. Wipe the axle shaft tube bore clean.

2. Install a new bearing with Installer C-4826 with Handle C-4171

3. Ensure that the bearing is not cocked and is seated firmly against the tube shoulder.


CAUTION: DO NOT use the new axle shaft seal to position or seat the bearing in the axle shaft bore.

Axle Shaft Seal Installation:

4. Install the new axle shaft seal with Installer C-4826 and Handle C-4171.

5. When the tool contacts the tube end (face), the seal is position to the correct depth.