Disassembly and Assembly

NOTE: Tighten all valve body screws to 5 Nm (40 inch lbs.)

Do not clamp any portion of valve body or transfer plate in a vise. Any slight distortion of the aluminum body or transfer plate will result in sticking valves, excessive leakage or both. When removing or installing valves or plugs, slide them in or out carefully. Do not use force.

NOTE: TAG ALL SPRINGS AS THEY ARE REMOVED FOR REASSEMBLY IDENTIFICATION.

Refer to Figures 41 through 55 for procedures.

Fig. 41:

Fig. 42:

Fig. 43:

Fig. 44:

Fig. 45:

Fig. 46:

Fig. 47:

Fig. 48:

Fig. 49:

Fig. 50:

Fig. 51:

Fig. 52:

Fig. 53:

Fig. 54:

Fig. 55: