Harmonic Balancer - Crankshaft Pulley: Service and Repair

REMOVAL
1. Disconnect negative cable from battery.
2. Raise vehicle on hoist.
3. Remove right wheel and inner splash shield.
4. Remove drive belt.

Crankshaft Damper-Removal:

5. Remove crankshaft pulley.

INSTALLATION

Crankshaft Damper-Installation:

1. Install crankshaft pulley using plate L-4524, thrust bearing/washer and C-4685-Cl, 5.9 inch screw.
2. Install drive belt.
3. Install inner splash shield and wheel.
4. Connect negative cable to battery.