A-Pillar Trim

A-PILLAR TRIM

REMOVAL

1. Remove A-pillar grab handle, if equipped.
2. Remove screws from cowl trim cover.
3. Remove cowl trim cover.

Fig. 1:

4. Grasp A-pillar trim and pull outward to disengage clips attaching A-pillar trim to A-pillar (Fig. 1).
5. Separate A-pillar trim from vehicle.

INSTALLATION

1. Position A-pillar trim at A-pillar, align clips and press into place.
2. Install cowl trim cover.
3. Install A-pillar grab handle, if equipped.