Center High Mounted Stop Lamp Unit (CHMSL) Replacement

Fig. 3 Center High Mounted Stop Lamp:

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove liftgate trim panel.
3. Remove CHMSL lamp mounting screws.
4. Remove CHMSL lamp.
5. Turn bulb sockets 1/4 turn counterclockwise.
6. Separate socket from lamp.

INSTALLATION
1. Position socket in lamp.
2. Turn bulb sockets 1/4 turn clockwise.
3. Position CHMSL lamp in place and install mounting screws.
4. Install liftgate trim panel.
5. Connect battery negative cable.