Procedures

HEADLINER

REMOVAL

(1) Remove sun visors and vanity mirrors.
(2) Remove sun visor center supports.
(3) If equipped, remove coat books.
(4) If equipped, remove roof rail modules.
(5) Remove A-pillar trim covers. Refer to: "Trim Panel : Service and Repair" Service and Repair
(6) Remove B-pillar upper trim covers. Refer to: "Trim Panel : Service and Repair" Service and Repair
(7) Remove C-pillar upper trim covers. Refer to: "Trim Panel : Service and Repair" Service and Repair
(8) Remove D-pillar trim covers. Refer to: "Trim Panel : Service and Repair" Service and Repair
(9) Remove liftgate opening header trim.
(10) If equipped, remove overhead console screw.
(11) If equipped, remove reading lamp.
(12) Remove dome lamp.
(13) Remove push in locking fasteners attaching headlining to rear roof header and roof bows.






1. Roof
2. Overhead Console Bracket
3. Headlining Assembly

(14) Remove wiring connections.
(15) Remove headlining from roof.
(16) Extract headlining through liftgate opening.

INSTALLATION

(1) Insert headlining through liftgate opening.
(2) Place headlining in position on roof.
(3) Connect wire connectors.
(4) Install left sun visor support.
(5) Install push in locking fasteners attaching headlining to rear roof header and bows.
(6) Install right sun visor support.
(7) Install sun visors and vanity mirrors.
(8) If equipped, install roof rail modules.
(9) If equipped, install coat hooks.
(10) Install dome lamp.
(11) If equipped, install reading lamp.
(12) If equipped, install overhead console.
(13) Install liftgate opening header trim.
(14) Install D-pillar trim covers.
(15) Install C-pillar upper trim covers.
(16) Install B-pillar upper trim covers.
(17) Install A-pillar trim covers.