Throttle Valve Cable/Linkage: Service and Repair

31TH - Automatic Transmission
REMOVAL
1. Disconnect battery negative cable.






2. Disconnect cable core from throttle lever pin (Fig. 224).
3. Disconnect cable retainer from throttle body bracket (Fig. 224).






4. Disconnect cable from throttle valve lever at transaxle (Fig. 225).
5. Disconnect cable retainer at transaxle bracket (Fig. 225).






INSTALLATION
1. Install throttle valve cable to bracket at transaxle (Fig. 226). Connect cable to transaxle throttle valve lever.
2. Route cable through center of intake manifold (#2 & #3) runners.






3. Connect throttle valve cable retainer to throttle body bracket (Fig. 227).
4. Connect cable core clip to throttle lever (Fig. 227).
5. Adjust throttle valve cable.
6. Connect battery negative cable.