Liftgate Cylinder Lock Switch Input Shorted (Export)

Tests 1 - 3:

Tests 4 - 5:

SYMPTOM
LIFTGATE CYLINDER LOCK SWITCH INPUT STUCK - (EXPORT ONLY)

WHEN MONITORED
At all times when battery power is supplied to the Body Control Module.

SET CONDITION
When the BCM senses voltage to the cylinder lock switch between 1.3 and 3.25 volts for over 10 seconds.

POSSIBLE CAUSES
- DTC present
- Body control module - liftgate cylinder switch voltage incorrect
- Liftgate cylinder switch ground open
- Liftgate cylinder lock switch MUX open
- Cylinder lock switch stuck