IOD Wake Up PSD and PLG Shorted

Tests 1 - 2:

Tests 3 - 5:

SYMPTOM
IOD WAKE UP PSD & PLG SHORT

WHEN MONITORED
Anytime the Body Control Module is awake.

SET CONDITION
If the BCM senses an over current signal on any of the Wake Up Signal circuits this code will set.

POSSIBLE CAUSES
- DTC present
- Body control module - IOD wake up short
- Left sliding door wake up signal wire short to voltage
- Liftgate module wake up signal wire short to voltage
- Right sliding door wake up signal wire short to voltage
- Left sliding door module - IOD wake up short to voltage
- Power liftgate module - IOD wake up short to voltage
- Right sliding door module - IOD wake up short to voltage