Incomplete Latch Cinch - Overcurrent

Tests 1 - 2:

Tests 3 - 7:

SYMPTOM
INCOMPLETE LATCH CINCH - OVERCURRENT

WHEN MONITORED
Whenever the power sliding door is operating in the closing direction.

SET CONDITION
The latch motor stall current of 6.2 amps has been detected, with no pawl or ratchet failure. This code is set during the first stage of the power cinching operation.

POSSIBLE CAUSES
- DTC present
- Binding door
- Cinch/release motor latch driver wire open
- Cinch/release motor unlatch driver wire open
- Cinch/release motor latch driver wire short to ground
- Cinch/release motor unlatch driver wire short to ground
- Latch assembly