Incomplete Latch Cinch - Overcurrent

Tests 1 - 2:

Tests 3 - 5:

Tests 7 - 9:

SYMPTOM
INCOMPLETE LATCH CINCH - OVERCURRENT

WHEN MONITORED
Whenever the power liftgate is performing a cinching operation.

SET CONDITION
The latch motor stall current of 6.2 amps has been detected, with no pawl or ratchet failure. This code is set during the first stage of the power cinching operation.

POSSIBLE CAUSES
- DTC present
- Binding door
- Liftgate latch cinch driver wire open
- Liftgate latch release driver open
- Liftgate latch cinch driver wire short to ground
- Liftgate latch cinch driver wire short to harness ground
- Liftgate latch release driver wire short to ground
- Liftgate latch release driver wire short to harness ground
- Latch assembly