Incomplete Power Open - Hall Effect Signal Missing

Test 1:

Tests 2 - 6:

Tests 7 - 11:

SYMPTOM
INCOMPLETE POWER OPEN - HALL EFFECT SIGNAL MISSING

WHEN MONITORED
Whenever the power liftgate is performing a power open operation.

SET CONDITION
The PLG Module detects that the motor is rotating (monitors hall effect pulses) but no hall effect pulses are being detected. This code is set during the power open (2 second chime period, prior to liftgate movement) operation.

POSSIBLE CAUSES
- DTC present
- Power liftgate module - hall effect open
- Binding liftgate
- Hall effect ground circuit open
- Liftgate hall effect supply wire open
- Liftgate hall effect supply wire short to ground
- Liftgate hall effect supply wire short to harness ground
- Liftgate hall effect signal wire open
- Liftgate hall effect signal wire short to ground
- Liftgate hall effect signal wire short to harness ground
- Power liftgate motor