Incomplete Power Open - Latch Failure

Tests 1 - 3:

Tests 4 - 8:

Tests 9 - 13:

Tests 14 - 18:

Tests 19 - 23:

SYMPTOM
INCOMPLETE POWER OPEN - LATCH FAILURE

WHEN MONITORED
During the Power Liftgate open cycle.

SET CONDITION
The power open operation was not completed due to latch failure. This DTC is set during a power open cycle.

POSSIBLE CAUSES
- DTC present
- Binding liftgate
- Liftgate latch cinch driver circuit short to harness ground
- Liftgate latch cinch driver circuit short to ground
- Liftgate latch cinch driver wire open
- Liftgate latch release driver wire open
- Power liftgate module - full open circuit open
- Power liftgate module - pawl circuit open
- Power liftgate module - ratchet circuit open
- Ground wire open
- Ground wire open
- Ground wire open
- Liftgate ajar switch sense wire open
- Liftgate full open switch sense wire open
- Liftgate pawl switch sense wire open
- Liftgate full open switch sense wire short to ground
- Liftgate full open switch sense wire short to harness ground
- Liftgate cinch/release motor
- Liftgate cinch/release motor
- Liftgate full open switch
- Liftgate pawl switch
- Ratchet switch