Loss of Ignition Run/Start

Test 1:

Tests 2 - 3:

SYMPTOM
LOSS OF IGNITION RUN-START

WHEN MONITORED
With the ignition in the Run-Start position the module monitors the Run-Start Driver circuit for proper system voltage.

SET CONDITION
If the voltage on the Run-Start Driver circuit drops below 4.5 volts, the code will set.

POSSIBLE CAUSES
- Left SIACM, SIACM run - start driver
- Right SIACM, SIACM run - start driver
- Active FCM ORC run - start DTC's
- ORC, loss of run - start
- Stored code or intermittent condition
- Active code present