Turn Signal Lamp Replacement

REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the tail lamp unit (Refer to LAMPS/LIGHTING - EXTERIOR/TAIL LAMP UNIT - REMOVAL).
3. Remove the bulb back plate from the tail lamp unit.
4. Separate the bulb from the lamp bar.

INSTALLATION
1. Install the bulb into the back plate.
2. Install the bulb back plate to the tail lamp unit.
3. Install the tail lamp unit (Refer to LAMPS/LIGHTING - EXTERIOR/TAIL LAMP UNIT - INSTALLATION).
4. Connect the negative battery cable.