Rear Brake Rotor

REMOVAL





1. Raise and support the vehicle
2. Remove the tire and wheel assembly
3. Remove the disc brake caliper.
4. Remove the caliper adapter bolts.
5. Remove the disc brake caliper adapter (2).
6. Remove the retaining clips and rotor assembly (1).

INSTALLATION





1. Install the rotor (1) to the hub/bearing.
2. Install the caliper adapter (2).
3. Install the caliper adapter bolts and tighten the mounting bolts to 135 Nm (100 ft. lbs.).
4. Install the disc brake caliper,.
5. Install the tire and wheel assembly.
6. Lower the vehicle.