Muffler: Service and Repair
MUFFLERREMOVAL
1. Raise vehicle on hoist.
2. Remove the exhaust pipe.
3. Remove the muffler-to-catalytic converter clamp (3).
4. Remove the muffler isolators (1 and 4).
5. Remove the muffler (5) from the catalytic converter.
INSTALLATION
1. Install muffler to the catalytic converter.
2. Make sure the alignment tang seats in the alignment slot.
3. Install exhaust clamp. Do not tighten at this time.
4. Install muffler isolators.
5. Install exhaust pipe.
6. Align muffler and exhaust pipe. Tighten exhaust clamp nuts to 42 Nm (31 ft. lbs.).
7. Check the exhaust system for contact with body panels. Make the necessary adjustments, if necessary.
8. Lower vehicle.
9. Start engine and check for exhaust leaks. Repair exhaust leaks as necessary.