Instrument Panel Top Cover

REMOVAL
1. Remove A-pillar trim. Using a trim stick (special tool #C-4755) or equivalent, gently pry out and remove.

Instrument Panel Top Cover:

2. Using a trim stick, disengage clips attaching rear edge of top cover to instrument panel.

NOTE: The Instrument Panel Top Cover may be hard to unsnap from the instrument panel. Be sure not to mar, scuff, or damage the instrument panel pad.

3. Remove top cover from vehicle and silencer.

INSTALLATION
1. Place the silencer pad into position.
2. Place instrument panel top cover in position on vehicle.
3. Engage clips attaching rear edge of top cover to instrument panel.
4. Pull top cover rearward.
5. Install A-pillar trim.