Hose - Supply

HOSE - POWER STEERING SUPPLY

REMOVAL - 2.4L ENGINE
1. Remove filler cap from power steering fluid reservoir.
2. Using a siphon pump, remove as much power steering fluid as possible from the power steering fluid reservoir.
3. Raise vehicle.
4. Remove hose clamp securing supply hose to power steering pump, then remove supply hose from pump fitting.
5. Lower vehicle.
6. Remove hose clamp attaching power steering fluid supply hose to power steering fluid reservoir, then remove supply hose.
7. Remove the power steering fluid supply hose from the vehicle.

INSTALLATION
1. Install and correctly route power steering fluid supply hose from remote fluid reservoir to power steering pump.
2. Install fluid supply hose onto power steering fluid reservoir. Install hose clamp. Be sure hose clamp is installed past bead on fluid reservoir fitting.
3. Raise vehicle.
4. Install power steering fluid supply hose on power steering pump supply fitting. Install hose clamp. Be sure hose clamp is installed past bead on pump fitting.
5. Lower vehicle.
6. Fill and bleed power steering system using Power Steering Pump Initial Operation Procedure.
7. Inspect system for leaks.