Bulb - Rear With Overhead Console

REMOVAL




1. Disconnect and isolate the battery negative cable.
2. Remove the rear dome lamp unit (2) from the headliner.
3. With the lamp lens (1) in the open position, carefully unsnap the bulb (3) from the two bulb holders within the rear dome lamp housing.

INSTALLATION

CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the lamp, the socket and/or the lamp wiring.




1. With the dome lamp lens (1) in the open position, align the ends of the bulb (3) with the two bulb holders within the rear dome lamp housing (2).
2. Carefully press the bulb firmly and evenly into the bulb holders until it snaps into place.
3. Reinstall the rear dome lamp unit into the headliner.
4. Reconnect the battery negative cable.