Cushion/Cover-Seat Back - Second Row

CUSHION/COVER-SEAT BACK - SECOND ROW

REMOVAL

Center




1. Using a trim stick C-4755 or equivalent, remove the cup holder.




2. Using a trim stick C-4755 or equivalent, remove the seat belt bezel.




3. Remove the screws and remove the side shields.
4. Remove the bolt and remove the seat belt anchor.
5. Separate the J-straps (1 & 2) and pull cover up over frame.




6. Remove the four seat back bolts and remove the seat back.
7. Remove the seat back cover and foam.

Outer




1. Fold the rear seat forward.
2. Remove the side shields.
3. Separate the J-straps (1 & 2) and pull cover up over frame.




1. Remove the four bolts securing the seat back.
2. Remove the head rests and partially remove the seat back cover.
3. Remove the head rest sleeves and remove the cover and cushion.

INSTALLATION

Center




1. Position the seat back cover and foam over the seat back frame and install the seat back.
2. Install the bolts.




3. Connect the J-straps (1 & 2).
4. Install the seat belt anchor and tighten the bolt to 43 N.m (32 ft.lbs.).
5. Install the side shields.




6. Install the seat belt bezel.




7. Install the cup holder.

Outer




1. Position the seat back cover over the seat back frame and install the headrest sleeves.
2. Position the seat back cushion on the frame and position the cover over the cushion.
3. Install the seat back and install the bolts.




4. Connect the J-straps (1 & 2).
5. Install the side shields.